f

Thursday, March 10, 2016

Master Sewing and Design Certification/Piped Pockets

If by chance you are thinking about taking the plunge and working toward Master Sewing And Design Certification, I wanted to let you know that most of the techniques that I'm sharing with you at this point are not a part of the requirements. For instance, you will need to demonstrate a welt pocket, but it does not need to be a piped welt pocket. I think that the tutorials offer great information, and hopefully help you in projects that you take on. Something that you might want to think about doing is getting a notebook, doing the samples for yourself and building your own sample notebook. A notebook like this can be a wonderful resource. I made one when I was in school...lots of years ago :)...and I loved my notebook. Sadly, we had a flood and I lost the book, but I am now building a new one. For those of you who teach, this is a great resource to have and to share.  
Today I wanted to do a welt pocket with purchased piping. This is a fun technique to have in your sewing arsenal as you can customize your garments with a purchased piece of piping, or even create your own. Since the piping that I'm using is quite small, it could also be used to make bound buttonholes, and the process would be basically the same. 

Piped Welt Pockets

The fabric that I'm using is a piece of raw silk.  
Depending upon where you want to place your pocket, and the type of fabric that you are using, you may want to back the pocket opening with a piece of interfacing. I used a piece of cotton fusible interfacing. Just be sure that the interfacing corresponds to the fabric.
As we did with the triangle buttonhole, marking is very important. Notice here that I have marked the center of my pocket and the ends. Hand basting is best for this step.  
The size of the piping may not be as wide as the tape that is holding the piping, so be sure to measure the width of the piping before you begin. My piping is approximately 1/8" wide. 
Once I determine the width of my piping, I then marked the outside edge of the pocket. 
Align the piping with the basted edge of the pocket.
Stitch down the piping, starting and stopping at the marked ends of the pocket. I stitched the piping to the fabric on the right side, but it's easier to see the stitching from the back side.
Once the piping has been stitched to the garment, clip the pocket open, using the center basted line as a guideline.  
Stop clipping about a half inch away from the ends, and clip a small v shape as you see below.
Turn the edges of the piping to the inside of the pocket opening and press.
Now that the piping is in place, we will add the pocket bag to the inside. Begin by stitching the pocket facing to the lower piped edge. Once the pocket facing has been stitched to the lower edge of the piping, simply fold it down and press.
Now stitch the top pocket to the top edge of the piping.
Once the top pocket and the pocket facing have been stitched in place, it's time to sew the pocket together.
Turn the pocket over and make sure that the piping is aligned and you are happy with how it all looks. Maybe give it a little light steam, depending upon your fabric. 
Fold back the sides and reveal the small triangle that was cut at the ends of the pocket.  
Beginning on one side, stitch across the triangle, right at the edge of the pocket and continue stitching around the pocket to the other side and stitch across the opposite triangle.  
All I need to do now is take the basting stitches out of my fabric and my pocket is complete. 
If by chance you are using a piece of piping that is encased in fabric, you will probably want to pull a little of the piping out from the edge so that you don't have to sew over the piping. A larger piece of piping could also leave a bump on the right side of the garment which you would not want. The piping that I used is quite small and basically pressed flat, so it is not an issue. 

The Pattern Review Weekend will be May 13th and 14th, here in Chicago. If by chance you are coming, be sure to check out Chicago Fabric Yarn and Button located at 208 South Wabash. The shop is not a large shop, but if you don't mind digging, you can find some wonderful treasures. The piping that I used for this demonstration was purchased there. This is our only downtown fabric store. All the other stores are either in the suburbs, or will require a ride on the elevated train. 

I hope this tutorial will inspire you to be creative with your pockets and buttonholes. Think about building a sample notebook. I have lots of tutorials coming up and I think you will enjoy having the notebook as a reference.
Happy Sewing,
Rhonda




Share this PostPin ThisShare on TumblrShare on Google PlusEmail This

23 comments:

  1. Wow! Thank you Rhonda. Your tutorials are so wonderful with all those pictures. I know how much work that is, and I really appreciate all you do for us.
    Hugs, Joy

    ReplyDelete
    Replies
    1. Thank you Joy :)
      I was actually beating myself up a bit as I wished I had the blouses 2 more pictures, but hopefully this gets it across clearly.

      Delete
    2. Rhonda,

      Thanks so much for this tutorial and I agree with Joy! The finished product is very smart looking :-)

      Delete
  2. Thank you! Very nice results, I will pin this.

    ReplyDelete
  3. You make it look so easy! Thanks for taking the time to show all of us readers and followers how to do such a fun pocket!

    ReplyDelete
    Replies
    1. Well, it's like I always say, everything is easy as long as you know how to do it :)
      Thanks so much Linda :)

      Delete
  4. Great tutorial, Rhonda. Thanks, so much.

    ReplyDelete
    Replies
    1. Thanks Bunny :) Your blessing always means so much!

      Delete
  5. Thanks Rhonda. Now you need to make a garment for this neat little pocket to go into...........

    ReplyDelete
  6. Thank you so much for this tutorial. The pictures do help quite a bit to see each step.
    Thank you
    Marie

    ReplyDelete
  7. How pretty is that pocket?! Thanks for the tutorial.

    ReplyDelete
  8. Hi Rhonda, Thanks ever so much for these clear, precise instructions! Do think that's how I'll address the pockets in my Pepernoot. I do have the zipper now, and found cording for the piping at an interior design/drapery store. Do have yet another question; haven't started cutting the faux leather to make the piping since I'm not sure if I should attempt to use bias strips or not. Since this fabric has no grain would simple straight cuts work? Thanks again for all your great ideas/lessons/creativity. Laura H

    ReplyDelete
    Replies
    1. Here's test for you. Take your faux leather and pull it in the straight of grain, crosswise grain, and then on the bias. If you see more give in the bias direction, by all means, cut it on the bias.

      Delete
  9. Thank you for this tutorial its so nice and clear. I will keep it for future reference.

    ReplyDelete
  10. FYI Rhonda, the bias stretch test 'won'. Ever so thankful you suggested that because now my piping will be the most flexible possible. Laura H.

    ReplyDelete
    Replies
    1. I'm so happy you asked :) Your jacket is going to be beautiful.

      Delete
  11. Thank you, Rhonda--this is a great tutorial! Your sample is beautiful and I find myself wanting many, many yards of that piping all of a sudden. =)

    ReplyDelete
  12. Question: You said you measured the piping (1/8") and then you marked the edges of the pocket. Did you mark them 1/8" away from the center line?
    Also, when you aligned the piping to the pocket opening edge, did you align the stitching lines or did you put the piping next to the stitching line? I can't tell by the picture.
    So hard to explain. The tutorial is great with all the pics. Thank you so much.

    ReplyDelete
    Replies
    1. Yes, the lines are 1/8" away from the center line. But, be sure to measure the width of your piping as it may be wider than the piping that I used. The stitching line of the piping is placed directly on top of the basted line that was 1/8" away from my center line. Hope that helps. Let me know if you need further explanation.

      Delete